MOTECK V-BOX II

The Moteck V-Box II allows allows a DiSEqC 1.0, or 1.2 satellite receiver to control a conventional actuator style 36 volt motor. It takes DiSEqC commands from your MPEG-2 / MPEG-4 DVB satellite receiver and converts them into 36v pulse and sensor to store positions, 60 positions can be stored. A remote control is also included allowing the unit to work as a stand alone positioner too.

Technical Specification:

• Compatible with any Actuator or H-H Mount
• 3 Digit LED Display
• Drive Dish up to 3M (Optional:5M)
• 60 Satellite Positions
• Fine-tune EAST / WEST Buttons
• Electric Overload Protection ( Auto-recovery )
• Anti-Noise Design
• Model V-BOX II
• Input 230 VAC / 50Hz(110 VAC / 60Hz available)
• Output 36 VDC
• Max. Output Current 3.5A / 4.2A
• Max. Power Consumption 80W / 100W
• Protocol DiSEqC 1.0 / 1.2
• Controled by DiSEqC 1.2 Receiver or as standalone unit
• Remote Control
• Resynchronize Function YES
• Manual Buttons Power ON / OFF, EAST / WEST
• Protection Software Limit Protection