|
Yet again Duolabs strike back
with another ground breaking
device. The CAS3+. In
a single product, the CAS
Interface 3, combines all the
superb features of the CAS
Interface 2, its Add-On Board
plus many additional options.
This new release offers very
advanced technical features.
Unlike the CAS Interface 2, the
CAS Interface 3 can fully manage
PCMCIA connectors and easily
connect external additional
modules.
However, the most interesting
feature is the possibility of
being able to emulate the PCMCIA
port of a Common Interface
(EN50221) receiver and thus use
a Cam directly as if it were
inserted in a receiver.
Consequently the CAS
Interface 3 can also be used by
professionals to test a CAM
(Conditional Access Module)
without inserting it in a
receiver.
CAS Interface 3 also enables
users to manage and program
several types of SmartCard,
which includes both current ones
and those yet to be developed.
Therefore the CAS Interface 3
can be regarded as a
multifunction programmer
suitable for the management of
J-Tag, ISP, I2C, etc., through a
USB port.
All features are explained in
the User Manual available to
download from duolabs site.The
Kit supplied with CAS Interface
3 comprises of:
- 1 CAS Interface 3 device
- 1 20-Pin female cable,
length 30 cm
- 1 J-Card
- 1 Dummy Card Technical
The main features of this
great device are as follows:
- USB Full Speed
connection at 12 MbitRS-232
Serial Connection
- 20 Pin External
Connector
- Internal Clock Speed
48Mhz
- No need for external
power supply
- Full PCMCIA connector
support
- Full support for next
generation Wireless devices
CAS Studio user friendly
GUIOn the ground features:-
Common Access Modules (CAM):
Magic Cam, Matrix Cam, Matrix
Revolution, Matrix Reloaded,
Matrix Reborn, and all CAMs
based on SIDSA chipsets, which
can be managed directly by means
of a PCMCIA connector. For a
full list of supported modules,
open the Graphics Menu of Cas
Studio. Remember to download the
latest release from our web
site.
Thanks to the High Speed
internal clock Cas Interface 3
is around 4 times faster than
Cas Interface 2. Most of
software routines for Flash
writing have been rewritten.
Joker Cam, Zeta Cam and
substantially all CAM modules
based on NEOTION chipsets. These
modules can be programmed and
repaired using a J-Card. For a
full list of supported modules,
open the Graphics Menu of Cas
Studio. Remember to download the
latest release from
www.duolabs.com.
Dragon Cam; it is possible to
program any version by inserting
the Dragon Cam into Cas
Interface 3 and using a Dummy
Card. This mode eliminates the
need of inserting the Dragon Cam
into a receiver, which can
sometimes damage the CAMs
besides being unpractical. It is
also possible to repair faulty
Dragon Cams if they fail to
initialize due to a faulty Flash
Memory. To do so, it is
sufficient to open the module
and connect a few wires,
following a procedure that can
be easily implemented even by
less expert users.
Special thanks goes to Dream
Multimedia for their support and
patience.
X-Cam, with ANGEL and ORION
chipsets, standard and premium
version. It is possible to
program any version by inserting
the X-Cam into Cas Interface 3
and using a Dummy Card. This
mode eliminates the need of
inserting the X-Cam into the
receiver, which can sometimes
damage the CAMs besides being
unpractical. It is also possible
to repair faulty X-Cams if they
fail to initialize due to a
faulty Flash Memory. In this
case it is necessary to open the
module and connect a few wires,
following a procedure that can
be easily implemented even by
less expert users.
Special thanks goes to
X-Crypt for their support.
- Smartcard programming.
This feature is very important
for all those who wants to
program a Smartcard based on PIC
microcontroller or Atmel
microcontroller. The full list
of Smartcard can be viewed
directly from the graphical menu
of Cas Studio.
More... All the OS cased cards
like Titanium Card, OPOS Card,
Knotcard and more can be
programmed without any problem
throught the USB port. All
future Smartcard can be
supported thanks to the great
flexibility of Cas Interface 3.
Dragon Card Loader can be fixed
if corrupted by the special
repair function.
- RS-232 Phoenix Smartmouse
emulation.
This emulation can be done
through the RS-232 serial port.
No matter what's the clock speed
for the Smartcard. You can
either choose
3,58/3,68/4,00/6,00 Mhz. This
great feature is given by the
total flexibility of the
internal programmable clock
generator.
- DreamBox 56xx and 7000
series boot repairing function.
If your DreamBox wil not reboot
due to a faulty flash the CAS
Interface 3 will solve your
problem without the need for any
special cables or hard
soldering.
- Sidsa embedded chip
Set-Top-Boxes programming.
Program the Sidsa CA embedded
module. This most works like Cam
programming feature. No need for
special cables or special
connectors.
Support receivers are Xtreme,
Manhattan, Nextwave 2500.
- Cam Explorer.
This is a real cool feature
which allows the user to insert
any Cam in the PCMCIA connector
and browse the content of you
Cam. This acts like a real
Common Interface Set Top Box. It
gives you the possibility to get
into the menus and at the same
time use all the remote
controller features.
- Various Utilities.Various
PC utilities are included in Cas
Studio. All those tools are free
of charge and can be freely
used. Duolabs made them to give
the user the possibility to
enjoy other* Sim Editor. This
software allows you to edit your
GSM smartcard. Save/edit
phonebook, SMS and Smartcard
files. * Wincrypt. This software
allows you to encrypt and
decrypt your files and folders
using as 3DES key your GSM
Smartcard. This software works
pretty much as Winzip but the
encryption is secured by a
secret key in your GSM Smartcard
|
